Saturday, December 31, 2016

Huawei Presents B5328 4 X 4 MIMO LTE Router

Around the end of 2016, Huawei offers the world's first commercial LTE router B5328 with 4 × 4 MIMO antenna technology. The B5328 LTE Router offers significantly higher data rates in a correspondingly equipped network than devices with 2 × 2 MIMO antenna technology. The Huawei B5328 is the successor to the popular Huawei E5186 LTE Router. In the free trade, the Huawei B5328 is currently not available; however, interested network operators and service providers can order the device on request and thus make available to their customers.

 

Based on the GCT’s GDM7243Q, the only LTE-A chip commercially available that offers 4x4 MIMO capability, enables Huawei B5328 LTE CPE with higher data rates and throughput while using limited bandwidth (“double speed” with the same limited bandwidth), which is a scarce commodity for network operators.

 

huawei-b5328-b5328-155-1

 

By integrating the receiver with four antennas and equipping the base station with four transmitters, mobile operators can maximize the use of their spectrum. Huawei B5328 is the successor to Huawei E5186 4G LTE Router. With GDM7243Q chipset, Huawei B5328 cpedelivers LTE Category 5/6/7 throughputs with double speeds enabled by 4X4 MIMO technology, and supports Voice over LTE (VoLTE) and eMBMS (LTE broadcast) as well as other advanced features.

 

The Huawei B5328 was already introduced in December 2015, but so far only supplied to very few operators, as most LTE networks currently set to 2 × 2 MIMO antenna technology and the B5328 router has no appreciable advantage in such networks to the predecessor model Huawei E5186 Router. You can buy the B5328 for example in Tunisia with the provider mobilis. Some European network operators have already carried out tests with the Huawei B5328, for example the Czech Vodafone. Vodafone has achieved test with 4 × 4 MIMO antenna technology and Carrier Aggregation around 300 Mbit/s in the downlink.  

 

huawei-b5328-b5328-155-2

 

The Huawei B5328 has no telephone function in the currently available version B5328-155 and has only a single RJ45 Ethernet connection on the back. The WLAN module works only on 2.4 GHz (WiFi 802.11 b/g/n), the exact speed I could not find unfortunately. Basically, the B5328 appears not to be a high-end router in the face of quite meager facilities, while the previous Huawei E5186 LTE CPE had a much greater variety of functions (Wi-Fi 802.11ac and 4x Gigabit Ethernet).

 

The Huawei B5328 LTE router will also come to the market in Germany, Austria or Switzerland. As we know, the China Mobile will also use this device for the upgraded LTE-Advanced TD-LTE network. From today's point of view, there is not much to be in favor, as network operators rely on 2 × 2 MIMO antenna technology, higher modulation (256QAM) and frequency bundling to increase the speeds in their LTE networks. Currently, the Huawei E5186 is still dominating the market for 2 X 2 MIMO LTE networks.  

 

 

Thursday, December 29, 2016

Four LTE Category 6 Mobile Hotspots to Recommend

LTE networks are becoming the mainstream available in many countries and areas. With LTE technology, users can enjoy high speed surfing, online games or watching videos etc..The good news is that this is not the end. The LTE technologies are also evolved to LTE advanced and it’s said the 5G network is under test now.

 

huawei-e5786-netgear-790s-zte-mf970-alcatel-y900-front-logo-and-screen

 

Currently, many carriers are trying to upgrade the LTE Category 3 or 4 to the latest advanced Category 6 with carrier aggregation technology (in short: CA). With LTE-advanced technology, the LTE data rate could be improved to double faster than that of the current LTE cat4. Theoretically, the peak download speed could reach 300mbps and upload speed to 50Mbps. Here comes a question, which device could support the LTE Cat6 advanced networks and achieve this speed? Today, we would recommend a few similar mobile WiFi hotspot supporting LTE advanced carrier aggregation technology from vendors.

 

huawei-e5786-netgear-790s-zte-mf970-alcatel-y900-back

 

Huawei E5786

 

Huawei E5786 should be the first LTE Cat6 mobile WiFi available in the market with Huawei own Hisilicon chipset. It has three branch models: E5786s-32a, E5786s-62a, E5786s-63a. The Huawei E5786s-63a and E5786s-62a are for the network providers in Australia and they had new name “Telstra Wi-Fi 4G Advanced Pro X” and “Optu 4G WiFi modem” respectively. There are white and black colors available. But you can get the unlocked version from www.4gltemall.com for global use. Like its predecessors Huawei E5573 and E5577, the branch models could support different LTE frequency bands for different carriers and areas. Up to 10 wireless users could connect to Huawei E5786 and surf at high speed. There is a LCD screen in the front with power button. The back cover could be removed, but the 3000mAh battery is built-in. The SIM card and Micro SD card slots could be seen when back cover removed. There are two TS-9 connectors for external 4G LTE/3G antenna.

 

huawei-e5786-netgear-790s-zte-mf970-alcatel-y900-back-cover

 

As the world’s first LTE Cat6 mobile 4G router, Huawei E5786 is the best seller in similar gadgets. If you like this mobile hotspot, you’d better to check the network frequency bands and choose the right in the branch models.  

Check more specification and details about Huawei E5786: http://www.4gltemall.com/huawei-e5786-4g-lte-cat6-mobile-wifi.html

huawei-e5786-netgear-790s-zte-mf970-alcatel-y900-back-cover

 

Netgear Aircard 790s

 

Netgear Aircard 790s is the second LTE cat6 mobile router available in the market. Based the predecessor Netgear Aircard 782s, it looks similar to the 782s aircard. Unlike the Huawei E5786, the screen of Aircard 790s is capacitive screen, where user can operate and do simple settings for the mobile hotspot. The power button is on the top side, the bottom side has two connectors for external antenna (TS-9 type). The USB port is also special with 3.0 port, but with the device, Netgear provides the USB 2.0 cable. The back cover could also be removed, so as the battery. The battery capacity is 2930mAh. The SIM card slot could be seen after battery is pulled out. No slot for Micro SD card. With Qualcomm MDM9230 chipset, Aircard 790s could support up to 15 wireless WiFi-enabled devices. With the touchscreen, Netgear Aircard 790s is attractive for many users in practical functions.  

 

Check more specification and details about Netgear Aircard 790s: http://www.4gltemall.com/netgear-aircard-790s-4g-mobile-hotspot.html

 

huawei-e5786-netgear-790s-zte-mf970-alcatel-y900-battery

 

ZTE UFi MF970

 

Following the steps of the above two vendors, ZTE released the UFi MF970. It looks common like its predecessor MF910. MF970 was already available for Vodafone 4G contract. The front middle is the screen to indicate the connection status. User can do simple settings through the power and menu button. The power and menu button is on the top side. The back cover can’t be removed, so the battery can’t be changed. And there are also two connectors for external LTE/3G antenna. Like Netgear Aircard 790s, there is no slot for Micro SD card. Also with Qualcomm chipset MDM9230, ZTE UFi MF970 could support up to 14 wireless users. The battery is only 2300mAh, which is much lower than the above two similar hotspots. The design of ZTE MF970 looks cool. Other features are very similar to the competitors above.  

 

Check more specification and details about ZTE UFi MF970: http://www.4gltemall.com/zte-ufi-mf970-lte-cat6-mobile-wifi-hotspot.html

 

huawei-e5786-netgear-790s-zte-mf970-alcatel-y900-sim-card-slot

 

Alcatel One Touch Y900

 

Alcatel One Touch Y900, also called Alcatel Link Y900 4G+, looks special in the appearance. The signal bars on the front side looks cool but are not really interesting. In all the four LTE cat6 mobile routers, the Y900 is the only which doesn’t have a LCD display. There is only a power button on the body with the WPS button on the other side of the button. The back cover could be removed for changing the battery and inserting SIM card and SD storage card. The big battery is interesting, which has 3600mAh capacity and not only working long time, but also charge other electronics to work like a power bank. What’s amazing, the Alcatel Y900 could support up to 32 wireless users to access internet. In the four devices, Alcatel Y900 seems to be the most powerful mobile hotspot. I personally like this one more.  

 

Check more specification and details about Alcatel One Touch Y900: http://www.4gltemall.com/alcatel-link-y900-4g-led-mobile-hotspot.html  

 

The above four LTE cat6 mobile hotspot should be the most popular for LTE advanced networks. You need prefer to the vendor brands, prices, or the functions. We suppose you would choose the right one for the high speed surfing on the go!

 

More images about the features:

huawei-e5786-netgear-790s-zte-mf970-alcatel-y900-power-button

huawei-e5786-netgear-790s-zte-mf970-alcatel-y900-usb-and-antenna-connector

huawei-e5786-netgear-790s-zte-mf970-alcatel-y900-usb-port

huawei-e5786-netgear-790s-zte-mf970-alcatel-y900-antenna-connectors

 

Tuesday, December 20, 2016

Netgear LB1111-100EUS 4G LTE Modem Review

At the IFA 2016, the Californian network specialist Netgear showed a new LTE modem - the LB1111 for the home use. The device has been available since September 2016 in two different versions(model LB1110 and LB1111). The user has a more economical choice without PoE or a more expensive version with PoE. The Netgear LB1111 modem can establish a connection up to LTE Category 4.

 

netgear-lb1111-lb1111-100eus-1 

Features and characteristics of Netgear LB1111-100EUS
Manufacturer and type: Netgear LB1111-100EUS
Chipset: unknown
LTE category: CAT4
Download rate up to 150 Mbit/s
Upload rate up to 50 Mbps
Supported LTE bands: B3, B7, B8, B20, B40
Downwards compatible with: UMTS DC-HSPA+ (up to 42 Mbps)
Support of LTE-Advanced: No
MIMO Support: Yes
Connection for external antenna: Dual TS-9 for 4G/3G(Buy Netgear LB1111 External antenna)
Network | LAN & WLAN
LAN Ports: 1x 1-Gbit WAN
WLAN Standards: no WLAN
5 GHz WLAN Support: No
Encryption: No
WLAN Hotspot Function: No
Others
Battery pack: No battery integrated
Dimension: 120 x 99 x 31 mm at 150 g
USB: No
Memory Card Expansion: No
Release: 05.09.16
available at: www.4gltemall.com
User guide
Installation instructions: " Download from here(PDF, 3.5 MB)
Detailed manual: »  Download from here(PDF, 3.5 MB)

 

Netgear LB1111

Power over Ethernet, or PoE for short, is the magic word that counteracts the cable dialect. The technology makes it possible to transfer power via a LAN connection in addition to the network signal. This allows the LB1111 to be operated without a connection to a commercial outlet. If you want, you can optionally access the included power supply. The 4G network is connected by means of a micro- SIM card and can provide bandwidths up to LTE Category 4. There is also an appropriate tariff required - up to 150 Mbit/s downstream and up to 50 Mbit/s in upload implemented. In addition, all essential in Europe are frequencies (800 MHz, 1,800 MHz and 2,600 MHz) supplied. If no LTE connection is available, the modem can also access 3G (HSPA+) with up to 42Mbps. In an emergency, GPRS is used. If the signal is bad at certain location, the two connectors for external antenna are available to improve the signal.

 

Netgear LB1111 LB1111-100EUS

 

 

Suitable for networking a server farm

Netgear itself underlines the business factor of the LB1111 and lists the model as suitable for the networking of server racks. Even in an office or for demonstration purposes, the device is well suited. As compatible operating systems, the manufacturer lists Windows 7, 8, 8.1, 10, Vista and XP as well as Mac OS from version 10.6.8. Furthermore, the Netgear LB1111 modem can be connected to a router or a switch, if required. This allows the LTE connection to be routed wirelessly to mobile devices such as smartphones and tablets. Practical: The Netgear LB1111 informs via an incoming SMS about an available update.

 

Netgear LB1111 LB1111-100EUS

 

 

Further features of Netgear LB1111

The LTE signal quality is visualized by a five-digit LED. To highlight the reception, the luminaries were made in different sizes. An active current supply and a LAN connection are also signaled by means of an LED. The only physical control element is a reset button. A network cable, a user manual and a power supply are included with the modem. If you like the Netgear LB1111 LTE Modem, welcome to buy it from www.4gltemall.com.   We also provide other Netgear 4G Aircards such Aircard 790s and Aircard 810s, if you like them, welcome to check more details here: http://www.4gltemall.com/4g-wireless-router/netgear-4g-lte-router.html  

Tuesday, December 13, 2016

Huawei E8377 CarFi VS ZTE VFi MF905

More and more people show great dependence to WiFi, even when they are on the go, especially in a car. The manufacturers in China has notice the demand and provided solution for this. We had introduced Huawei CarFi E8377 many times in the past year. You may get familiar with it. And another Chinese vendor ZTE also provide the similar product ZTE VFi MF905 for the network demand in a car. Here come the questions: What’s the difference between Huawei E8377 and ZTE MF905? Which one is better? In this article, you will find the answer for this.

 

zte-vfi-mf905-vs-huawei-carfi-e8377-4gltemall

 

Appearance ZTE VFi MF905 comes later than Huawei E8377, but the two mobile WiFi hotspots look alike in shape and color. They are both in black color and used for cigarette cradle in a car. There is a USB port in the body, and of course there is a slot for SIM card in the two hotspots. But the SIM card slot in Huawei E8377 is covered by a small cap. The SIM card slot in MF905 is just above the USB port.  On the top side, the logo and LED indicators are shown. The power button is at the center of the top.

 

huawei-e8377-carfi-hotspot-4gltemall

 

Technical Specifications They are both with LTE Category 4 technology, so they can achieve peak download speed to 150mbps and upload speed to 50mbps. The transmission date rates are very good for daily surfing. But whether the surfing speed could be stable when a car is in high speed driving, it still needs time to test.   As a follower, ZTE MF905 could support up to 8 wireless users to access internet while Huawei E8377 supports only 10 users. But in most cases, they are enough to use in a car. There is no official saying about the WiFi coverage distance, but we suppose there is no any problem for the WiFi to cover a whole car.

 

huawei-carfi-e8377-sim-card-slot

 

Control If user want to do some setup in the CarFi, they can connect the tablets, smartphones or PCs with WiFi and log in the web interface to setup. But here now, Huawei and ZTE also provide a new option for users. User can download the apps to setup the two CarFi. For Huawei E8377 CarFi, you may use “Huawei Mobile WiFi” app. And for ZTE MF905, the app name ZTE Link could be used for settings.   Frankly speaking, the two Car WiFi hotspots are very similar. We cannot tell which one is better from the specifications and features. Only the real test would tell which would have more stable and better performance. We will take a test next time in real driving situation to see this result.

 

zte_mf905_vfi-4gltemall

 

If you had read some review before, there is also other solution for the Car WiFi. The model number is Huawei E8372 and Alcatel W800. They are in the shape of USB dongle, not like the E8377 and MF905. But with the cigarette plug, it would be also OK to use in a car. If you want to know more details of them, welcome to check on www.4gltemall.com .  

Sunday, December 11, 2016

ZTE MF79 4G LTE WiFi Dongle Review

We had introduced 1&1 Mobile WLAN LTE Stick, and today we get the new ZTE MF79 LTE Dongle which is for another carrier ALTEL. On the ZTE MF79 dongle, there is the logo of ALTEL with ZTE 4G. Between them, there are two LED indicators, one for network signal and the other for WiFi.

 

ALTEL ZTE MF79

 

On the back of the USB Stick, the model number “MF79” is printed and it indicators it’s a LTE USB Modem. There is also CE number 0979 and place of origin “Made in China” with the RoHS.   The front cover with ALTEL logo could be removed, and below the cover, it’s the inner part with model number (MF79), SSID, Password and IMEI number. And of course, there is SIM card slot, the size is for standard SIM card. Beside the SIM card slot, it’s the slot for Micro SD card, where connected users can share files through WiFi. According to the official sayings, the ZTE MF79 could support the SD card maximum to 32GB. But there is no connector for external antenna.

 

ZTE MF79 BACK

 

The ZTE MF79 LTE USB Modem looks like a 4G USB dongle, but it can work like a mobile hotspot. Up to 10 WiFi enabled devices could connect to the WiFi from ZTE MF79 and access internet. Supporting LTE Category 4, ZTE MF79 could achieve peak download speed to 150Mbps and upload speed to 50Mbps. Backward with 3G UMTS and 2G GSM networks, the surfing speed could reach 43.2Mbps and upload speed to 5.76Mbps, which is good enough for most cases.

 

ZTE MF79 ALTEL

 

The functions of ZTE MF79 are very similar to the Huawei E8278 and Huawei Wingle E8372. They all look like USB Modem, but have the power to work as a mobile hotspot. Especially due to the small size, user can take them in hand or pocket easily outdoor or for business trip.  

 

The ZTE MF79 is very easy to use. You can connect it to PC or directly to the power adapter which has USB plug port. Only if there is power supply, it can work as a WiFi hotspot. So the ZTE MF79 could work as a wireless router in a car if connecting to a USB plug in the car. In this case, it would be a good network solution for a car.

 

ZTE MF79 BACK COVER

 

After connected with the ZTE MF79 WiFi, you can setup the USB Dongle through Web UI. The address is 192.168.0.1 and the default password is admin to log in. User can setup for the language, connection, WiFi, and WPS. In most cases, the setup is unnecessary. It’s just plug and play. The connected user quantity is also showed in the web UI. The ZTE MF79 can also calculate the statistic for the data consumption. The SMS can also be read from the dongle.

 

ZTE MF79 SIM card slot

 

In summary, the ZTE MF79 is a good and smart mobile USB WiFi dongle for daily use at home or on the go. Supporting high speed surfing, ZTE MF79 can also share the internet with multiple users. And no setup and plug & play features makes it very friendly to users. It’s a great partner for network access!    

Tuesday, December 6, 2016

Netgear Aircard 810s VS Aircard 815s

Looking at the current available 4G LTE Mobile Hotspot, Netgear seems lead the LTE Advanced terminals. If you had known Huawei E5786 mobile WiFi, you may think this is the fastest 4G pocket router. However, if you know the two 4G mobile routers which we would introduce today, you may have a new view for the mobile terminals.

 

netgear-aircard-815s

 

Since LTE Cat3 and Cat4 are becoming the mainstream for carriers, LTE-advanced would of course be available in near future. Here we can see some carriers are stepping fast. The carrier AT&T in USA and Telstra in Australia had presented the LTE Advanced networks for commercial use. The aforementioned Huawei E5786 is a LTE cat6 mobile router, which is already available for many network providers. AT&T and Telstra already used the LTE Cat9 and Cat11 terminals, which mean the LTE Cat9 and Cat11 technologies are available for the two carriers.

 

netgear_aircard_810s_mobile_hotspot

 

AT&T introduced Netgear Aircard 815s and had a new name “AT&T Unite Explore” while Telstra introduced Netgear Aircard 810s and has a new name of “Telstra WiFi 4GX Advanced III”. The two 4G mobile hotspots very similar in the name but feature differently. Today, we will have what’s the difference between them.   Appearance The Netgear Aircard 810s follows the design of the predecessor Aircard 790s, which is a same level mobile router to Huawei E5786 supporting LTE Cat6. The body of Aircard 810s is made of plastic but feels good. With a 2.4 inch LCD screen, user can read the connection status and setup the routers on the screen.

 

netgear-aircard-815s-appearance-features

 

The Netgear Aircard 815s also has a 2.4inch QVGA capacitive touchscreen like Aircard 810s. So the screen has same functions to Netgear AC810S for settings. There special feature of Aircard 815s which should mention is the rugged design that is dustproof, shock and water-resistant. This feature allows users to take the Aircard 815s not only for common outdoor activities, but also in severse weather, especially for the wilderness exploration. They both have two connectors for external antenna and socket type is TS-9. Between the two connectors, there is a USB 3.0 port.

 

netgear-aircard-810s-vs-ac815s-antenna-connector

 

  Technical Specifications  

 

Below the blank shows the details specifications of the two routers:      

Product Netgear Aircard 815s (Telstra WiFi 4GX Advanced III) Netgear Aircard 810s (AT&T Unite Explore)
LTE Technology LTE Cat9 + 2 x Carrier Aggregation LTE Cat9 + Cat11 + 3-band Carrier Aggregation
LTE Bands Band 2/ 4 / 5 / 12 / 17 / 29 / 30 Band 1/3/7/8/28
Max Supported User 15 15
WiFi 802.11b/g/n/ac, 2x2 MIMO 802.11b/g/n/ac, 2x2 MIMO
Antenna Two external antenna connectors(TS-9) Two external antenna connectors(TS-9)
Battery 4340 mAh 2930 mAh
Screen 2.4”QVGA capacitive touchscreen 2.4”QVGA capacitive touchscreen

 

Performance  

 

Actually, we had not tested the two units at same network environment in practice. But we will do that respectively in near future and will provide full test report for the two mobile hotspots. We hope the report would be a good reference for the potential users who need the 4G mobile routers. There is one function that we have to mention: The Aircard 815s and 810s can both work like a mobile power bank, which is called Battery Boost, they can charge other electronics such as smartphones and tablets. This function is practical and useful in most cases.

 

netgear-aircard-815s-battery-boost-charging

 

From the appearance and specifications, we can see the two mobile routers (Aircard 815s and 810s) are with the latest technology and dominate the wireless terminals. Netgear Aircard 810s supports higher level network technology and it should be the fastest 4G mobile router. Of course, the price is also not cheap for the Aircard 810s, so as Aircard 815s. But if you would like a budget mobile pocket 4G router, the Netgear Aircard 790s may be a good option for you.